Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Plano
Gate repair in Plano starts with a written price before any work begins. Most Plano gate repairs run between $185 and $650 depending on whether we’re resetting a post that blackland clay has pushed out of plumb, replacing a hinge that’s been binding for years, or bringing a 1990s operator up to current UL 325 entrapment standards. Our crews know Plano’s neighborhoods, its HOA expectations, and the specific way its soil treats steel posts. Call (469) 613-2832 and you’ll get a live person, a straight answer, and a price in writing before anyone picks up a tool.
Why Vance Gate Repair Murphy Is Plano’s Preferred Gate Repair Company
Plano homeowners research before they call. They’ve read the three-star reviews, they know what a gate repair should cost, and they want evidence, not enthusiasm. That’s how we work. Under The Haven Standard, every Plano job gets a written scope and a written price before work starts, then a documented photo record of what we found, what we adjusted, and what we installed when we leave.
The 22,000+ gates we’ve repaired and installed since 2014 include hundreds across Plano, from Deerfield to Willow Bend to the Legacy West corridor. Our technicians are background-checked and uniformed, and you get a name and photo before arrival. Adrian Vance built this company on commercial access-control documentation habits, and we bring that same record-keeping to every residential driveway gate in Plano. The 365-Day Done Right Promise covers every repair: if it’s not right within a year, we make it right at no charge.
Our Gate Repair Services in Plano
Hinge & Post Repair
This is the repair Plano needs more than almost any other. The blackland prairie clay under Plano swells when it rains and shrinks hard during summer drought, and over 25 to 40 years that cycle walks gate posts off vertical. We see posts in Plano that have drifted 1 to 3 inches, and no hinge adjustment fixes a gate whose post is no longer straight. The actual repair is resetting the post in a concrete collar that extends below the active clay layer, then reinstalling the original gate so the HOA’s like-for-like finish requirement stays intact.
Gate Realignment
A gate that drags, won’t latch, or scrapes the ground usually has a post problem, not a hinge problem. In Plano’s 1980s and 1990s subdivisions, the matching ornamental iron gates were hung on posts set before the soil had fully settled from construction. We check post plumb first on every realignment call, then correct the geometry so the gate swings true without forcing the operator to work against the weight. You get a photo log of the before and after positions, plus the part numbers we installed.
Automatic Gate Repair
Plano’s older neighborhoods are full of operators installed in the 1990s that are now failing under daily use. When an HOA inspection flags an operator for missing UL 325 entrapment protection, the repair is not a hobby-level fix. We service nine automation brands including LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can usually repair the motor already on your property rather than steering you toward a replacement you didn’t ask for. Photo-eye alignment, limit switch calibration, and arm bracket repair are the most common fixes we perform on Plano automatic gates.
Electric Gate Repair
When a gate stops responding to the keypad, remote, or loop detector, the failure is usually in the control board, the receiver, or a safety sensor that’s gone out of alignment. In Plano communities where the management company controls a shared entry gate, we coordinate with the property manager and document every setting change so future technicians aren’t guessing. We service whatever brand is already installed, and we leave a written record of the diagnosis and the part we replaced.
BeforeAfterTrusted Brands We Service in Plano
We work on whatever motor is already on the property. That includes Ghost Controls, DoorKing, Elite, and Mighty Mule, plus five other major automation brands. For Plano customers, we stock common control boards, photo-eyes, limit switches, and hinge hardware locally so a repair doesn’t stall waiting on a shipped part. If your operator is obsolete but repairable, we’ll tell you that plainly and give you the written price for the repair. If it’s truly done, we’ll show you the failed component and explain the replacement options without pushing a single brand.
Common Gate Repair Problems We See in Plano Homes
- Hinge post drift from blackland clay. The post was plumb in 1987. It isn’t now. The clay swells and shrinks with every wet and dry cycle, and the gate binds because the post moved, not because the hinge is worn.
- Hail-dented aluminum panels. Collin County’s severe weather corridor produces hail that dents aluminum and thin-gauge steel gate panels. HOAs in Plano typically require replacement panels in the matching finish, so we document the damage and match the powder coat or finish before ordering.
- Failing 1990s gate operators. These units are 25 to 35 years old, many lack current UL 325 entrapment protection, and HOA inspections are flagging them. The repair path is usually a photo-eye retrofit and control board replacement, not an entire new gate system.
- Latch and strike misalignment. When a post shifts even half an inch, the latch no longer lines up with the strike plate. We adjust the strike and often add a reinforcing plate so the fix holds through the next wet-dry cycle.
Pricing for Gate Repair in Plano, TX
Here’s what gate repair in Plano actually costs. A hinge replacement runs $185 to $320 per hinge depending on whether it’s a welded barrel hinge or a bolt-on adjustable. Post resetting with a concrete collar below the clay layer runs $450 to $850 per post, including haul-off and finish touch-up. Gate realignment is $165 to $290 when the posts are still plumb. Automatic operator repair runs $240 to $650 depending on whether we’re replacing a control board, a photo-eye set, or an arm bracket. Every price is quoted and agreed in writing before any work starts. No one touches a tool until you’ve seen the number. Call (469) 613-2832 for a free estimate.
We Also Serve Cities Near Plano
From our base in Murphy, we dispatch to Plano and the surrounding cities daily. That includes Gate Repair calls in Allen, Richardson, Carrollton, and Garland. If you’re in one of those cities, the same written-price standard and the same documented photo record apply.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Plano
Often, yes. Most Plano HOAs require architectural review board approval for any change to a gate’s style, height, finish, or operator type, and many require it even for like-for-like repairs on visible street-facing gates. We can prepare the technical documentation your application needs: photos, measurements, finish specifications, and operator model details. We’ve coordinated with Plano HOA architectural committees enough times that we know what they ask for. Call (469) 613-2832 and we’ll tell you whether your specific community’s rules require pre-approval before the first visit.
Because the post underneath the hinges has moved off vertical, and no hinge adjustment fixes a post problem. Plano’s blackland clay swells when wet and shrinks in drought, and over decades that cycle torques posts 1 to 3 inches out of plumb. The permanent repair is resetting the post in a concrete collar that extends below the active clay layer, then re-hanging the gate. We did exactly that in the Deerfield neighborhood recently: the hinge post was 2.5 inches off plumb, the gate was dragging, and the fix was the collar, not the hinges.
Yes. We photograph the existing finish before any work begins, then match the powder coat or paint specification to the original. Plano HOAs from the 1980s and 1990s often specified one of a handful of standard finishes for ornamental iron gates, and we can identify which one you have and order matching panels or touch-up material. The finish match is part of the written scope you approve before work starts.
UL 325 is the federal standard for gate operator safety, requiring photo-eyes or contact edges that reverse the gate if something crosses its path. A 1990s operator without current entrapment protection can often be retrofitted with an external photo-eye set and a control board update rather than replaced entirely, which usually runs $350 to $600 in Plano. If the operator itself is too far gone, we’ll show you the failed components and give you a written replacement price. We never steer toward replacement when a repair meets the standard. Call (469) 613-2832 for an exact quote.
We coordinate with the property manager or HOA board directly. The documented photo record we leave includes the control board settings, the loop detector frequency, and the keypad relay wiring, so the management company has a complete technical record and the next technician doesn’t have to reverse-engineer the system from scratch. That documentation is standard on every visit under Clause 4 of The Haven Standard.
Written by Adrian Vance, Owner at Vance Gate Repair Murphy, serving Plano and the surrounding North Texas area since 2014.