Gate Repair in Murphy - Fixed Today, No Surprise Invoice

Trusted Gate Repair for Murphy Homeowners

A gate that won’t open, won’t close, or groans halfway through its travel usually has a specific, findable cause. Most gate repairs in Murphy come down to one of five things: a motor that lost its limit settings, a hinge that carried too much weight for too long, a photo-eye knocked out of alignment, a control board with a dead relay, or a weld that finally let go. Since 2014, Adrian Vance and the team at Vance Gate Repair Murphy have repaired over 22,000 gates by identifying that exact cause first, then fixing it with a written price in your hand before any work begins. If your gate is acting up today, call (469) 613-2832. A live person answers, and we can usually be at your property in Murphy the same day.

Call (469) 613-2832

What Our Gate Repair Service Includes

Every gate repair we perform in Murphy gets the same treatment: a named technician, a written scope of work, a flat price agreed before tools come out, and a photo record of what we found and what we changed. Here’s what falls under our gate repair service.

Electric Gate Repair

Electric Gate Repair covers the powered side of your gate: motors, control boards, transformers, wiring, and the low-voltage circuits that tell the gate when to move. In Murphy, storm-driven moisture and the clay soil’s habit of shifting can corrupt connections and cause intermittent failures that are easy to misdiagnose. We trace the circuit, identify the failed component, and replace only what’s actually dead. You leave with a wiring diagram and a photo log of the repair, not a vague invoice.

Automatic Gate Repair

Automatic gates rely on a chain of sensors and settings: limit switches, photo-eyes, keypads, remotes, and the logic board that coordinates them. When any one link fails, the gate behaves erratically, opening halfway, reversing for no reason, or refusing to respond at all. We work on nine major automation brands, which means we can repair the operator already installed on your property instead of steering you toward a full replacement. Most Automatic Gate Repair jobs are completed in a single visit.

Hinge & Post Repair

Hinges and posts carry the full weight of the gate leaf every single day, and Murphy’s expansive clay soil puts extra stress on posts as the ground swells and contracts through wet and dry seasons. A sagging gate is almost always a hinge problem or a post that’s drifted out of plumb, not a motor problem. Our Hinge & Post Repair service re-welds broken hinge barrels, replaces worn pivot bearings, and re-sets posts in concrete when needed. The gate gets squared up and the motor stops fighting the extra resistance.

Gate Realignment

Gate Realignment addresses gates that bind at the latch, scrape the ground, or leave a gap at the closing edge. The problem can be a shifted post, a stretched hinge, or a gate leaf that was never hung level in the first place. We measure the gap at both ends, check the post with a level, and correct the geometry so the gate travels its full arc without dragging. A properly aligned gate puts less strain on the motor and the hinges, which means it fails less often.

Lock Repair

Gate locks include mechanical keyed locks, solenoid releases tied to an access system, and magnetic locks that hold the gate closed until a signal releases it. When a lock fails, you either can’t secure the gate or can’t open it, and both problems are urgent for different reasons. We repair and replace lock hardware, align strike plates, and troubleshoot the low-voltage wiring that powers electric releases. Every lock repair gets tested through multiple cycles before we pack up.

Weld & Rust Repair

Wrought iron and steel gates in Murphy deal with humidity, rain, and occasional hail, and rust is the predictable result, especially at weld joints and bottom rails where water pools. We grind out rust, weld cracked joints and broken pickets, and apply protective treatment so the repair doesn’t start rusting again in six months. If a section of the gate is too far gone to weld cleanly, we tell you that plainly and quote a replacement section before any cutting starts.

Brands We Service for Gate Repair

Vance Gate Repair Murphy services nine automation brands, which means you don’t have to find a specialist for whatever motor is already bolted to your gate. DoorKing operators are common on heavy slide gates in Murphy’s larger properties, and we’ve repaired hundreds of them: we know their limit-switch logic, their relay patterns, and the common points where their control boards fail after power surges. We stock DoorKing OEM parts and can usually complete a repair the same day we diagnose it.

Elite and Ghost Controls are both popular on residential swing gates. Elite’s arm-style operators have specific torque settings that we calibrate with a meter, not by feel, and Ghost Controls’ modular design means we often replace a single failed module rather than the entire operator. Mighty Mule units show up on many Murphy driveways too, and we repair them with the same documentation standard as any commercial job: photographed settings, written part numbers, and a record of every adjustment. Whether your gate runs on one of those brands or any of the other seven we service, we work on the motor you have.

Before

After

Signs You Need Gate Repair Right Now

• The gate stops halfway and reverses. This usually means the limit switch or the force setting is off, or a photo-eye is sending a false obstruction signal. Left alone, the repeated reversals strain the motor and can burn out the control board, which turns a small adjustment into a much bigger repair.
• The gate scrapes the driveway or binds at the latch. A dragging gate is telling you the hinges or the post have moved. Continuing to run it under that extra resistance shortens the motor’s life significantly, and the binding will eventually warp the gate frame itself.
• You hear grinding, squealing, or a rhythmic clicking during travel. Grinding from the motor usually means a gear is failing, and squealing often points to dry or worn hinge pins. Both sounds are early warnings, and catching them now prevents a gate that simply refuses to move one morning when you’re already late.
• The gate opens but won’t close, or closes but won’t open. One-direction failure typically points to a limit switch that’s failed on one side or a relay on the control board that’s stuck. It also means the gate is either leaving your property unsecured or trapping vehicles inside, and both situations need attention quickly.
• The remote or keypad works intermittently. Intermittent operation is often moisture in a connection, a failing receiver, or a battery that’s about to die in the motor’s backup circuit. The problem only gets more frequent, and Murphy’s wet spring weather tends to accelerate the corrosion behind it.

Our Gate Repair Process - Step by Step

1. 1
   You describe what the gate is doing. The more detail you can give on the phone, the better prepared we arrive: when it started, whether it happens every time or only sometimes, and what sounds or motions you’ve noticed. A live person answers at (469) 613-2832 and writes it all down before dispatch.
2. 2
   We diagnose on site with meters and visual inspection. Our technician checks limit switch readings with a multimeter, verifies voltage at the control board, tests photo-eye alignment, and inspects hinges, welds, and posts for mechanical wear. We don’t guess. We measure, then we tell you what the numbers showed.
3. 3
   You get a written price before any work begins. Under The Haven Standard Clause 1, the flat price is written and handed to you before we pick up a tool. You approve it, or you don’t, and if you don’t, you owe us nothing. There is no surprise invoice at the end because there was no surprise at the beginning.
4. 4
   We complete the repair and document everything. Every adjustment and every part gets photographed. Limit switch positions, torque settings, wire connections, new hardware, the part number on the box, all of it. You get a photo log of every change we made, and we file a copy in our job records.
5. 5
   We walk you through what we did and test the gate with you. We cycle the gate multiple times together, show you the settings, and hand you the written record. If anything doesn’t feel right in the days or weeks after, the 365-Day Done Right Promise means we return and make it right at no charge.

How Much Does Gate Repair Cost in Murphy?

Gate repair costs in Murphy depend on what’s actually wrong, but most jobs we complete fall into clear ranges. A hinge replacement on a standard single swing gate typically runs $185 to $425, including re-setting the gate level. Photo-eye realignment or replacement is usually $120 to $260. Control board diagnostics and relay replacement land between $220 and $480 depending on the brand. A full swing gate motor replacement, depending on whether the arm bracket is intact, runs $650 to $1,400 installed. Welding repairs start around $150 for a single cracked joint and scale up if multiple pickets or the frame itself need work.

What affects the price: the brand of operator, the weight and length of the gate leaf, whether the post needs to be re-set in concrete, and whether rust needs to be removed before welding can start. What shouldn’t affect it: mystery. You’ll never hear us say “we’ll see when we open it up.” The written estimate covers the diagnosed work, and if we find something else during the repair, we stop and hand you a new written price before continuing. Every estimate is free, and a free second opinion on any written estimate from another company is part of how we work. Bring the paperwork and we’ll review it at no cost.

Gate Repair Near Murphy - Our Service Area

Vance Gate Repair Murphy serves homeowners throughout Collin County and the surrounding area. Most Murphy calls get same-day or next-day dispatch depending on when you reach us, and we regularly run repair routes through Wylie, Lucas, Richardson, Allen, Garland, Rowlett, Plano, Fairview, Rockwall, McKinney, and Frisco. If you’re just outside Murphy, the drive is short and the same written-price standard applies. For more on what we do in your neighborhood, see our Gate Repair in Murphy page or start at the home page for the full range of gate services.

Frequently Asked Questions - Gate Repair in Murphy

Schedule Your Gate Repair Service in Murphy Today

Call (469) 613-2832 now for a free, no-obligation estimate. A live person answers around the clock, and we’ll dispatch a background-checked, uniformed technician to Murphy with a name and photo provided before arrival. You’ll get a written price before any work starts, a documented record when we leave, and a full year under the Done Right Promise. No voicemail, no guesswork, no surprise invoice.

Written by Adrian Vance, Owner at Vance Gate Repair Murphy, serving Murphy and the surrounding Collin County area since 2014.