Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dallas
A gate repair visit in Dallas typically runs $140-$325 for hinge, post, and realignment work, while gate operator and circuit board replacements range from $450-$1,200 depending on the motor brand and wiring condition. Most repairs in Dallas are completed the same day, and our crew carries parts for the nine automation brands we service, so we’re not steering you toward a replacement you don’t need. Call (469) 613-2832 and you’ll speak to a live person, not a menu.
We work on gates across Dallas every week. We know the Prestonwood and Bent Tree subdivisions, the Preston Road corridor, and the older ornamental iron gates that define Far North Dallas. And we know what the Blackland Prairie clay does to them. That’s the part most gate companies don’t factor into the diagnosis. We do.
Key Takeaways:
- Dallas gate repairs cost $140-$325 for mechanical work, $450-$1,200 for operator and board replacements
- Written price handed to you before any tool comes out, under Haven Standard Clause 1
- 365-Day Done Right Promise on every repair
- Nine major automation brands serviced, so we work on the motor already on your property
- Documented photo record left with you after every visit, under Haven Standard Clause 4
Why Vance Gate Repair Murphy Is Dallas’s Preferred Gate Repair Company
We service Dallas daily with crews that understand local gates the way only someone who has worked on thousands of them can. Our reputation in Dallas is built on one thing: when we repair a gate, the problem stays fixed. Adrian Vance, who founded the company in 2014 out of commercial access-control work, carried that documentation habit into residential gate repair. Every visit ends with a photo log of what we found, what we adjusted, and what we installed. You keep a copy.
Dallas homeowners tell us the same thing: they had another company out, got a verbal estimate, paid the invoice, and then the same gate failed a few months later. What they didn’t get was a written record. We price in writing before work begins and we file the evidence. When the next technician works on your gate, there’s no guessing. That matters on a $30,000 ornamental driveway gate.
Response time to Dallas is same-day for urgent repairs, and our live answering happens around the clock. Background-checked, uniformed technicians are dispatched with a name and photo sent to you before arrival. No callbacks. No “we’ll put you on the list.”
Our Gate Repair Services in Dallas
Electric Gate Repair
Electric gate repair in Dallas overwhelmingly involves the circuit board, the photo-eye sensors, or the loop detector card inside the operator box. July and August heat in Dallas pushes these components past their rated operating temperatures, and we replace more boards in those two months than the rest of the year combined. If you live in Prestonwood or Bent Tree and your gate opens on its own, fails to close, or blinks a fault code after a 100°F day, that’s a heat-stressed board, not a curious ghost.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The brand is already on your property. We fix that brand.
Automatic Gate Repair
Automatic gate repair starts with one question: is the Dallas Gate Motor & Opener actually the problem, or is it the post? In Dallas, the answer is often the post. The clay soil under your driveway contracts every summer and pulls hinge posts inward, which makes the gate leaf drag, which makes the operator work harder, which burns out the motor. If we repair the motor without correcting the post, you’ll call us again in six weeks. We don’t do that. We fix the post, re-hang the gate, and then calibrate the operator. That’s the correct order.
Hinge & Post Repair
Hinge and post repair is the most common mechanical service we perform on Dallas gates, specifically on the ornamental wrought-iron swing gates built throughout North Dallas in the late 1980s through the early 2000s. The brick-and-masonry pillars look permanent, but many are set on shallow footings. Dallas’s expansive clay heaves in spring, shrinks in late summer, and slowly undermines the footing. We reset posts on deep concrete footings and weld or replace hinges that have failed under the strain. This is one service where our Gate Repair team’s 22,000+ completed jobs matters. We’ve seen the failure pattern enough times to fix it correctly the first time.
Gate Realignment
Gate realignment in Dallas is really a soil problem disguised as a gate problem. When a swing gate sags and scrapes the driveway, or when a slide gate jerks along the rack, the cause is usually a post that has moved, not a bent gate. We measure post lean, correct it with a properly set footing, and re-hang the gate leaf so it swings or slides true. Then we photograph the new limit positions and leave you the record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Dallas
We service nine major gate automation brands, including DoorKing, Ghost Controls, and Mighty Mule, so we’re never the company that tells you to replace a perfectly good motor because we only carry one line. Our Dallas trucks stock common boards, photo-eyes, limit switches, and remote transmitters for the operators most commonly installed across North Dallas subdivisions. That means fewer second trips and faster repairs for our Dallas customers.
Common Gate Repair Problems We See in Dallas Homes
- Post lean from Blackland Prairie clay shrinkage. In late August, after months of drought, the clay contracts and pulls hinge posts inward. The gate leaf drags, the operator overloads, and the breaker trips. This is the first thing we check on any Dallas repair call, because resetting the operator without fixing the post guarantees a repeat failure within weeks.
- Low post footings on brick-and-masonry driveways. The ornamental iron gates along the Preston Road corridor and in communities built during the 1980s and 1990s are often mounted to pillars with shallow footings. The clay heaves and shrinks every year, cracking the footing and throwing the gate out of alignment.
- Heat-stressed circuit boards and photo-eyes. Dallas summers put gate operator boards and infrared sensors past their rated operating range. When a Viking or DoorKing board fails in July, it usually presents as intermittent operation: the gate stops halfway, reverses for no reason, or ignores the remote entirely.
- Rack and pinion track misalignment on slide gates. After heavy rain, the clay expands and shifts the concrete pad that anchors the slide track. The rack teeth skip, the gate jerks, and the operator motor strains. This is a soil movement problem, not a gear problem, and Dallas techs who miss it replace a gear or a motor without ever touching the track alignment.
Pricing for Gate Repair in Dallas, TX
Here are the numbers Dallas homeowners actually pay. Basic hinge and post repair on an ornamental swing gate runs $180-$340, depending on the post condition and whether the hinge needs to be welded or replaced. Gate realignment work typically runs $140-$260. Electric gate repair is where pricing widens: replacing a photo-eye runs $180-$300, replacing a circuit board runs $450-$900 depending on the brand, and a full operator replacement for a Viking or DoorKing swing gate runs $850-$1,200 installed. Slide gate rack and track repair runs $350-$750.
What affects the price: whether the post needs to be reset on a new footing, whether the operator is repairable or genuinely dead, and the brand of the existing motor. The written price is handed to you before any work begins under Haven Standard Clause 1. You approve it, we do the job, and there’s no surprise invoice at the end. Estimates are free.
We Also Serve Cities Near Dallas
Our Gate Repair in Dallas coverage extends to the surrounding cities. We work regularly in Richardson, Carrollton, Garland, and Rowlett, and our dispatch is coordinated from the Dallas-Fort Worth office, so we can move a crew from Dallas proper to any of these cities with no delay. Same-day service applies in the entire metro area.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Dallas
Because the Blackland Prairie clay under your driveway has contracted during the drought, pulling the hinge post inward. The gate leaf then drags on the driveway and overloads the operator. This is a post problem, not a motor problem. If you had an operator replaced and nobody measured post lean, the new motor is working against soil movement it cannot overcome. Call (469) 613-2832 and we’ll check the post before we ever touch the operator.
Yes. Gates installed before entrapment regulations tightened in the mid-2000s often lack functioning photo-eyes and reverse-on-contact sensors. We check these safety devices on every repair, and if they’re missing or dead, we’ll show you photographically and recommend correcting them. Entrapment protection is a life-safety issue. We don’t bypass it, and we don’t leave a gate operating without it.
A sagging gate means the post has moved or the hinges have worn. Repairing the operator without fixing the sag means the new motor will strain, overheat, and fail again. On the other hand, if the post is plumb and the gate swings true, the problem may actually be in the operator. Our crew measures post lean, checks hinge wear, and then tests the operator under load so we replace only what needs replacing.
Usually it’s the concrete pad under the track, not the rack gear itself. Dallas’s clay expands after rain, pushing the pad slightly out of level. The rack and pinion lose clean engagement, and the gate jerks. We re-level the track, re-shim the rack, and lubricate and realign the drive gear. If you keep running it jerky, you’ll wear the gear teeth down until you need a full rack replacement. Call (469) 613-2832 for a free on-site assessment.
We can almost always repair the gate itself. The ornamental iron gates built across North Dallas in the 1990s are heavy, well-made steel. What fails is the post footing, the hinges, and the automation. We weld new hinges, reset posts on deep footings, and rebuild or replace the operator. Replacing the entire gate is rarely necessary. We work on old Viking, DoorKing, Elite, and Linear operators from that era regularly.
Call Us for Gate Repair in Dallas
If your gate is dragging, jerking, throwing a breaker, or just not responding, call (469) 613-2832. You’ll get a live person on the phone, a free estimate, and a written price before any repair begins. Under The Haven Standard, you’ll also get a documented photo record of what we found and what we fixed. Your gate, your call. We’ll be there.
Written by Adrian Vance, Owner at Vance Gate Repair Murphy, serving Dallas since 2014.