Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McKinney
A new driveway gate installation in McKinney typically runs $4,800-$11,500 for a custom ornamental iron double swing gate with automation, and most projects take 2-4 weeks from measure to final walkthrough. That price includes the written quote before any work starts, the poured footings, the operator, safety photo-eyes, and a documented photo record when our crew leaves. We are Vance Gate Repair Murphy, and we install driveway gates, pedestrian gates, sliding gates, swing gates, and double gates across every McKinney subdivision from Stonebridge Ranch to Trinity Falls. Call (469) 613-2832 for a free on-site measure and a written price.
Why Vance Gate Repair Murphy Is McKinney’s Preferred Gate Installation Company
McKinney homeowners call us because we write the price down before anyone picks up a tool. That is not a slogan. It is Haven Standard Clause 1, and it applies to every gate installation we do in McKinney, whether it is a pedestrian gate off Eldorado Parkway or a 16-foot double swing gate in Craig Ranch. Adrian Vance started this company in 2014 doing commercial access-control work, where every job required a wiring diagram and a written record. We brought that same habit to residential gates, and McKinney customers get the benefit: a photo log of every adjustment, every part number installed, and every limit-switch reading left with the homeowner.
We have installed and repaired over 22,000 gates since 2014, and what McKinney homeowners notice most is not the number. It is that the person who shows up is background-checked, uniformed, and named before arrival. The live person who answers the phone at (469) 613-2832 can tell you who is coming. No voicemail loop, no callback queue, no automated attendant, at any hour.
The gate installers who do well in McKinney are the ones who understand what is under the gate. McKinney sits on Blackland Prairie clay, and that soil moves. More on that below, but the short version is this: a gate installation in McKinney is a soil-engineering problem as much as a metal-and-motor job. We plan footings accordingly, and we photograph what we find when we dig.
Our Gate Installation Services in McKinney
Driveway Gate Installation
Driveway gates in McKinney are almost always ornamental iron or aluminum, mounted on brick or stone pilasters, and governed by an HOA style guide. We fabricate and install custom driveway gates that match the existing masonry and trim details on the home. Every driveway gate installation includes deep-concrete footings sized for Blackland clay, hinge posts set to dead plumb, and an operator matched to the gate’s actual weight and cycle count, not a generic horsepower guess.
Pedestrian Gate Installation
A pedestrian gate in McKinney usually sits alongside a driveway gate or provides side-yard access in communities like Craig Ranch and Trinity Falls. We build pedestrian gates with self-closing hinges, magnetic locks where security is a concern, and push-button or keypad entry. The gate gets its own footing, and we set the post at the same depth as the driveway gate posts. A pedestrian gate that leans after two wet seasons is a gate that was never footed for this soil.
Sliding Gate Installation
Sliding gates work well on McKinney lots where a driveway slopes or where a swing gate would arc into landscaping. We install cantilever and V-track slide gates, and in McKinney we build in drainage awareness that a generic installer often skips. North Texas ice events can leave water standing in a track, freeze it, and bend the rack. We set the track on a raised concrete pad with weep drainage, and we photograph the install. A slide gate in McKinney should glide in January and July.
Swing Gate Installation
Swing gates remain the most common style across McKinney, especially in Stonebridge Ranch where double swing gates on brick pilaster entries are the neighborhood standard. We install single and double swing gates with operators from LiftMaster, FAAC, BFT, Linear, and DoorKing. The critical part in McKinney is the pilaster itself. If the original pilaster was poured without deep footings, the gate will bind within a few years no matter how expensive the operator is. We check plumb before we hang anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in McKinney
We install and service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For McKinney customers, that means we can match whatever motor is already on the property instead of steering you toward a replacement. LiftMaster remains the most common operator we see in Stonebridge Ranch and Craig Ranch, followed by FAAC on heavier custom iron gates and Mighty Mule on lighter residential double gates. We stock common LiftMaster and FAAC parts locally, so a same-week install or repair does not stall waiting on freight.
If you want a second opinion on any written estimate from another company, bring us the paperwork. We review it at no cost. That is part of how we work everywhere, McKinney included.
Common Gate Installation Problems We See in McKinney Homes
- Hinge posts leaning out of plumb. McKinney’s Blackland clay swells in wet seasons and shrinks in drought. A post set in a shallow footing tilts, the gate leaf binds, and the operator burns itself out fighting the load. We see this in Stonebridge Ranch constantly, usually on pilasters poured directly over clay without piers.
- HOA-mandated safety systems that were never updated. Many McKinney communities require entrapment protection on automated gates. Older Viking and Linear boards without functional photo-eyes do not pass inspection. We retrofit photo-eyes and edge sensors as part of the installation, not as an add-on.
- Slide gate racks bent by ice. The February 2021 freeze seized exposed rack-and-pinion tracks across McKinney. Ice expansion cracked bracket hardware and bent racks, leaving gates off their rails. A new slide gate installation should include a raised, drained track pad and a rack rated for thermal movement.
- Operator circuit boards failing in summer heat. McKinney summers regularly exceed 100°F, and an operator housing that bakes in full sun degrades neoprene seals and circuit boards. We mount operators where they get airflow, and we photograph the install so you can see where the wiring lives.
Pricing for Gate Installation in McKinney, TX
Here are real McKinney numbers. A single swing gate with one opener runs $4,800-$8,200. A custom double swing gate on brick pilasters runs $6,500-$11,500, depending on gate weight, metal thickness, and whether we are stabilizing existing masonry. A sliding gate installation runs $5,200-$9,800, with the track pad and drainage included. Pedestrian gates run $1,400-$3,200, including self-closing hardware and a keypad if requested. The written price you receive before work starts is the price you pay. Under Haven Standard Clause 1, there is no invoice at the end that is bigger than the quote. Call (469) 613-2832 for a free measure and written estimate.
We Also Serve Cities Near McKinney
Our crews serve McKinney and the surrounding North Texas suburbs, including Allen, Prosper, Plano, and Wylie. If you are in McKinney and need Gate Installation, call us first. We dispatch locally, and scheduling is coordinated from our Dallas-Fort Worth office. You can also see where we work across Gate Installation in McKinney and nearby communities.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McKinney
Because the brick or stone pilasters were often poured directly over Blackland clay without deep footings, and Blackland clay swells and contracts dramatically with rain-drought cycles. The pilaster tilts, the gate leaf binds, and the opener motor fails fighting the load. We stabilize the pilaster with helical piers, reset the hinge posts, and only then hang the gate. In Stonebridge Ranch, we were called to a custom double swing gate on a brick-pilaster driveway entry. The gate operator was a LiftMaster that had burned out after months of fighting a binding leaf. Our crew found the left pilaster had leaned seven degrees off plumb because its post footing sat directly on Blackland clay without deep piers. We stabilized the pilaster with helical piers, reset the hinge posts, and installed a new FAAC swing gate operator with a freshly tuned loop detector and safety photocells. The gate has run silent and true through two full rain-drought cycles since. Call (469) 613-2832 for an inspection if your pilasters are leaning.
Yes. Most McKinney HOAs, including those in Stonebridge Ranch, Craig Ranch, and Trinity Falls, require entrapment protection on automated gates: functional photo-eyes, edge sensors, or both, plus a manual release. If your existing operator is an older Viking or Linear board without working photo-eyes, the installation will not pass inspection until those are retrofitted. We include entrapment protection in every automated gate installation we quote in McKinney. Call (469) 613-2832 and we will walk you through what your HOA requires and what the install includes.
Yes, but only if the footings are deep enough and the posts are set on something more stable than the top layer of clay. We use deep-concrete footings sized for the gate’s weight and the soil’s movement range, and where an existing pilaster has moved, we stabilize it before automating the gate. A heavy iron double gate in McKinney needs a low-speed operator with enough torque to move the gate without stressing the hinges, and we match the operator to the gate’s actual weight, not a guess. Call (469) 613-2832 for a free measure and written price.
The freeze likely seized the rack-and-pinion track, and the ice expansion cracked the bracket hardware or bent the rack. When the rack is bent, the gate binds on every cycle, and the operator burns out quickly. In McKinney’s freeze-thaw cycles, a slide gate needs a raised track pad with weep drainage and a rack rated for thermal movement. If your slide gate has not run right since the 2021 freeze, call (469) 613-2832. We will inspect the rack, the track, and the operator, and give you a written repair price before any work begins.
We match the gate to the pilaster’s stone or brick color, texture, and mortar line, and we fabricate the metal to follow the pilaster’s profile. Stonebridge Ranch homes tend toward a specific set of masonry tones, and we keep a photo reference of completed installs in the neighborhood so you can see what a matched gate looks like before fabrication starts. After the install, you receive a documented photo record of the finished gate, the operator wiring, and the post settings. Call (469) 613-2832 to schedule a free on-site measure.
Call Vance Gate Repair Murphy for Gate Installation in McKinney
If you live in McKinney and you are ready for a new gate, or if your current gate is binding, sagging, or failing to open, call (469) 613-2832. We will schedule a free on-site measure, hand you a written price before any work starts, and leave you a documented photo record when the job is done. That is the Haven Standard, and it applies to every gate we install in McKinney.
Written by Adrian Vance, Owner at Vance Gate Repair Murphy, serving McKinney and the surrounding North Texas suburbs since 2014.
Gate Installation in Nearby Areas
