Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Wylie, TX
Gate access control in Wylie means keypads, card readers, phone entry, and video intercoms on driveway and community gates that were mostly installed between 2000 and 2020 and are now hitting the age where boards fail, keypads go dead, and remotes stop pairing. The clay soil that moves under half of Collin County also moves gate frames, which pulls cables, cracks conduit, and leaves sensors misaligned. If your gate opens for some codes but not others, or the intercom buzzes but won’t release, call (469) 613-2832 and we’ll send a technician with a written price before any work starts.
Why Wylie Homes Are Different
Wylie’s housing stock is unusually uniform: HOA-governed subdivisions built in a tight window from roughly 2000 to 2020, many with ornamental iron driveway gates and cedar privacy fence gates installed during original construction. That concentration matters because entire neighborhoods now hit the 10 to 15 year mark on openers, hinges, and control boards at the same time. A LiftMaster operator in Inspiration and a DoorKing board in Sage Creek fail within months of each other, not because of brand defects, but because they were installed in the same era and weathered the same summers.
The bigger variable is Collin County’s expansive black clay. East of the city, near Lake Lavon, the soil holds moisture unevenly. Posts tilt, frames rack at the corners, and gates that latched perfectly in spring drag by August. We see lakeside communities like Inspiration with corner-twisted iron frames in as little as three years. Inland subdivisions move slower, but they still move. Any access control or welding job in Wylie has to account for a gate that may no longer be square to its own posts.
Our Main Wylie Services
These are the three services Wylie homeowners call us about most often.
Gate Repair in Wylie
Repair work in Wylie usually means a gate that drags, binds, or won’t latch because the posts have shifted out of plumb, or an opener that runs but won’t move the gate. We reset limit switches, replace worn hinges, reweld cracked joints, and adjust photo-eyes, then photograph every setting before we leave. Gate Repair in Wylie
Gate Installation in Wylie
New gate installations in Wylie start with a soil read: how the ground near the posts behaves through wet and dry cycles determines what depth and footing we recommend. We supply the gate, automation, and hardware, and we quote the entire job in writing before ordering anything. Gate Installation in Wylie
Gate Motor & Opener in Wylie
Most motor replacements in Wylie are on operators installed with the home 10 to 15 years ago. We replace the arm, board, or full unit depending on what the diagnostic shows, and we work on whatever brand is already there rather than steering you toward a full system swap. Gate Motor & Opener in Wylie
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Wylie
Gate access control in Wylie comes down to one recurring problem: the gate works, but the entry system doesn’t. Keypads go dark, phone entry won’t release the latch, card readers stop recognizing fobs, and intercoms buzz with no audio. The housing era is the culprit. Most of these systems were installed between 2005 and 2015, and the boards, relays, and wiring are aging out at the same time across entire subdivisions. Wylie’s clay soil compounds it: a post that shifts half an inch pulls low-voltage cable tight inside the conduit, which stresses connections and shorts boards. We service every common access control configuration, including Gate Access Control systems from DoorKing, LiftMaster, and Elite, and we leave a photographed record of every setting we change.
Keypad Entry
Signs you need it
The keypad lights up but won’t release the gate, works only sometimes, or has buttons that need to be pressed repeatedly.
What it costs in Wylie
Keypad replacement in Wylie typically runs $180 to $430 depending on whether it’s a wired or wireless unit and whether the existing wiring is still usable.
How we do it
We test voltage at the keypad, check the relay at the board, replace the unit or wiring as needed, and photograph the new programming before we leave.
Phone Entry
Signs you need it
The call comes through, but pressing 9 doesn’t open the gate, or callers report the line rings with no answer.
What it costs in Wylie
Phone entry repair in Wylie typically runs $200 to $500 depending on whether the issue is the relay, the phone line, or the control board.
How we do it
We trace the phone signal path from the entry station to the control board, replace the failed relay or module, and test the release with the homeowner present.
What Gate Access Control Costs in Wylie
| Item | Typical range in Wylie |
|---|---|
| Keypad replacement | $180 - $430 |
| Phone entry repair | $200 - $500 |
| Control board replacement | $250 - $600 |
Can you add a keypad to an existing Wylie gate?
Yes. We add keypads to most existing gates, wired or wireless, as long as the operator has an accessory input. The written quote includes the keypad, wiring if needed, and programming. Most jobs take one visit.
Why does my gate intercom buzz but won’t open?
That pattern usually points to a failed relay on the control board or a broken wire between the intercom and the operator. We test the relay first, then trace the wire path. Call (469) 613-2832 for a diagnosis with a written price.
Gate Parts & Welding in Wylie
Gate parts and welding in Wylie are dominated by the clay soil problem. A gate that drags or won’t latch has almost always moved at the hinge or latch post, and the fix is often steel repair rather than a new gate. We replace hinges, cut and reweld cracked joints, reset posts in concrete, and build up worn rollers. The work is documented the same way as our access control jobs: photos of what was found, what was cut, what was welded, and the part numbers installed. That’s the same record-keeping standard we apply to every Gate Parts & Welding job.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the ground, or the hinge pins look oval instead of round where they enter the barrel.
What it costs in Wylie
Hinge replacement on a Wylie iron or steel gate typically runs $150 to $350 per hinge depending on whether the post needs rewelding.
How we do it
We lift the gate, cut or unbolt the old hinge, weld in the new one, set the gate back on the post, and photograph the welds and the final swing clearance.
Post Replacement
Signs you need it
The gate post leans visibly, the gate drifts open or closed on its own, or there’s a gap at the base where the post meets the concrete.
What it costs in Wylie
Post replacement in Wylie typically runs $300 to $700 per post including digging, concrete, and rehanging the gate.
How we do it
We dig out the old post and footing, set a new post at the correct depth for Wylie’s soil conditions, pour concrete, and rehang the gate once the footing has set.
What Gate Parts & Welding Costs in Wylie
| Item | Typical range in Wylie |
|---|---|
| Hinge replacement (per hinge) | $150 - $350 |
| Post replacement (per post) | $300 - $700 |
| Custom welding repair | $180 - $450 |
How long does a post replacement take in Wylie?
One day to remove the old post, set the new one, and pour concrete. The gate goes back on the next day once the footing has had time to set. We quote the full job in writing before we dig.
Can you weld a cracked iron gate in place?
Sometimes. If the crack is on a flat section and the metal around it is sound, we can weld it without removing the gate from the posts. If the crack runs through a hinge point, the gate usually comes down for a proper repair.
Brands We Service in Wylie
We work on DoorKing, Elite, Mighty Mule, and LiftMaster systems, among nine major automation brands we service. Our trucks carry common boards, remotes, and photo-eyes for these brands, and our parts desk in the Dallas-Fort Worth metro office pulls anything else within a day for Wylie jobs. See our brands for the full list.
Pricing for Gate Repair in Wylie, TX
| Service | Typical range in Wylie |
|---|---|
| Keypad replacement | $180 - $430 |
| Phone entry repair | $200 - $500 |
| Control board replacement | $250 - $600 |
| Hinge replacement (per hinge) | $150 - $350 |
| Post replacement (per post) | $300 - $700 |
| Custom welding repair | $180 - $450 |
Prices push toward the top of these ranges in Wylie when the soil has moved a post far enough that the frame needs re-racking before the gate will sit square, or when a lakeside property near Inspiration has differential settling between the hinge and latch posts. Whatever the range, you get a written price before any work begins. No surprises, no add-ons you didn’t approve.
Neighborhoods We Serve in Wylie
We serve the full Wylie area, including the lakeside communities where soil movement is fastest and the inland subdivisions built in the 2000s and 2010s that are now aging through their first generation of gate hardware.
- Inspiration
- Sage Creek
- Birmingham Farms
- Woodbridge
- Boone Creek
Response time for gate repair in Wylie is typically same day or next morning, and a live person answers the phone around the clock.
Service Area - Cities Near Wylie
From Wylie, we also cover the surrounding Collin County and Dallas County communities. If you’re in Rowlett, TX, Garland, TX, Allen, TX, or Rockwall, TX, the same written-price and documented-record standard applies on every visit.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wylie
Same day in most cases. We dispatch from the Dallas-Fort Worth metro office and keep crews scheduled for Wylie throughout the week. A live person answers the phone at (469) 613-2832, and we’ll tell you the expected arrival window when you call.
That depends on your subdivision’s covenants. Repairs to an existing gate usually don’t require approval, but replacement gates or changes to the entry system sometimes do. We’ll flag it on the written quote so you can check before we order parts.
Yes. The expansive black clay east of Dallas shifts enough through wet and dry cycles to move gate posts out of plumb within a few seasons. That’s why Wylie sees more post-lean and frame-welding calls than older cities with more established soil profiles.
If your Wylie gate needs a keypad, a weld, a new post, or a full access control diagnosis, call (469) 613-2832. We’ll give you a written price before any work starts and leave you with photos of everything we did.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wylie Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.