Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dallas, TX
Gate access control in Dallas means keypads, intercoms, and card readers that have to survive Blackland Prairie clay shifting the posts they’re mounted to. The city’s late-1980s through 2000s build-out put ornamental iron driveway gates on thousands of Prestonwood, Bent Tree, and Preston Road corridor homes, and those systems are now hitting 20 to 30 years of age at the same time. When a keypad stops talking to the board or a photo-eye throws a fault, the soil movement underneath is usually part of the story. Call (469) 613-2832 and a live person answers, any hour.
Why Dallas Homes Are Different
Dallas sits on the Blackland Prairie, one of the most expansive clay formations in North America. The soil swells with spring rain and shrinks hard during late-summer drought, so gate posts slowly move out of plumb, year after year. A post that leans half an inch inward changes the geometry of the whole gate: hinges bind, the leaf drags, and the operator works against friction it was never rated for. In Far North Dallas subdivisions built between the late 1980s and early 2000s, those gates are now old enough that the original operators are failing in clusters. An experienced Dallas tech checks post lean before touching the motor, because a lot of July service calls that look like board failures are actually clay pulling the post inward. The masonry columns on those older driveways often sit on shallow footings too, which makes the movement worse.
Our Main Dallas Services
Most Dallas homeowners call us for one of three things: a gate that won’t open, a gate they want installed, or a motor that needs replacing. Here’s what each looks like in this city.
Gate Repair in Dallas
Repair work in Dallas usually starts with understanding what the clay has done to the gate before assuming the operator failed. We inspect post lean, hinge wear, wheel condition, and operator settings as one system, not separate problems. A gate that grinds or reverses on its own often has a post issue, not a motor issue, and fixing the wrong one means paying twice. See Gate Repair in Dallas for the full breakdown of what we diagnose and fix.
Gate Installation in Dallas
New gate installations on Dallas clay need more than a post set in concrete. We size footings to the soil, account for drainage, and set posts deep enough that August drought and October rain don’t move them within two years. Ornamental wrought-iron swing gates and slide gates are both common here, and the right choice depends on driveway slope and setback, not just preference. See Gate Installation in Dallas for specs, materials, and what the written quote includes.
Gate Motor & Opener in Dallas
Dallas summers push gate operators past their rated temperature, which is why circuit boards and sensors fail most often in July and August. We service nine automation brands and stock common boards, arms, and photo-eyes locally for faster turnaround. A motor replacement here means matching the existing gate weight, post condition, and cycle rate, not just swapping a unit. See Gate Motor & Opener in Dallas for brand coverage and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Dallas
Gate access control on older Dallas properties often involves systems that were installed when the house was built and have never been updated. Keypads mounted on shifting brick columns, phone entry units wired with telephone-line logic, and card readers with corroded connections all show up regularly in Prestonwood and Bent Tree. The fix usually isn’t the board, it’s the wiring and the mounting surface that Dallas clay has quietly pulled apart. We document every access-control job the same way: wiring diagrams, photos of the connections before and after, and a written record of what was changed. See Gate Access Control for the full service range.
Keypad Entry
Signs you need it
The keypad works intermittently, ignores certain codes, or lights up but doesn’t trigger the gate.
What it costs in Dallas
Keypad replacement in Dallas typically runs $180-$340 installed, depending on the brand and whether the wiring in the post needs re-running.
How we do it
We test the existing wiring, replace the keypad or just the worn key contacts, reprogram the codes, and photograph the final configuration.
Phone Entry
Signs you need it
Calls from the gate unit don’t ring through, or the relay won’t open the gate even when the call connects.
What it costs in Dallas
Phone entry unit replacement in Dallas generally runs $350-$600, with the spread depending on whether it’s a cellular unit or still on a copper phone line.
How we do it
We check the line or cellular signal, replace the unit or the relay, reprogram the directory, and test the full call-to-open sequence.
Card Reader
Signs you need it
Cards need multiple swipes to register, or the reader beeps but the gate doesn’t move.
What it costs in Dallas
Card reader replacement in Dallas typically costs $250-$450 per reader, including programming.
How we do it
We replace the reader, wire it to the operator, program the existing cards, and document the wiring with photos.
Video Intercom
Signs you need it
The video feed is black, the audio is one-way, or the indoor monitor won’t release the gate.
What it costs in Dallas
Video intercom replacement in Dallas usually runs $500-$900, depending on indoor monitor count and whether wiring needs replacement.
How we do it
We bench-test the outdoor station and indoor monitor, replace what failed, re-terminate the wiring, and photograph the completed install.
What Gate Access Control Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Keypad replacement | $180-$340 |
| Card reader replacement | $250-$450 |
| Phone entry unit | $350-$600 |
Can you fix my keypad the same day in Dallas?
Most keypad repairs are same-day jobs, because we stock common keypads and wiring connectors locally. If the post itself has shifted, the visit includes a written note on the lean so it can be addressed separately.
Does Dallas require anything specific for gate access control?
Most HOAs in Prestonwood, Bent Tree, and along the Preston Road corridor require board approval before new entry equipment is installed. We provide a written scope you can submit, and the flat price won’t change between quote and approval.
Gate Parts & Welding in Dallas
Dallas clay creates a specific failure pattern in gate hardware: hinges torque out of alignment, slide-gate rails buckle at the joints, and roller wheels flatten over years of dragging a gate that’s no longer level. On older ornamental iron gates, the metal itself is often still solid, but the mounting points have shifted and fatigued. We repair and fabricate on site where possible, so a bent hinge bracket doesn’t require replacing an entire gate leaf. See Gate Parts & Welding for the full parts and fabrication range.
Hinge Replacement
Signs you need it
The gate sags on one corner, scrapes at the latch, or the hinge pin wobbles visibly when you push the leaf.
What it costs in Dallas
Hinge replacement in Dallas typically runs $150-$400 per pair, depending on gate weight and whether welding is needed.
How we do it
We unweight the gate, cut or unbolt the old hinges, align the new pair to the post, and weld or bolt them in place.
Post Replacement
Signs you need it
The post leans inward or the gate drags at the latch side, and the post moves when you push on it.
What it costs in Dallas
Post replacement in Dallas generally runs $400-$900 per post, including concrete and gate re-hanging.
How we do it
We cut the old post at the footing, dig out the base, set a new post deeper into undisturbed clay, and re-hang the gate once the concrete cures.
Rail Repair
Signs you need it
The gate jerks or stalls mid-travel, or the rail has a visible kink or gap at a joint.
What it costs in Dallas
Slide-gate rail repair in Dallas typically costs $200-$500 per section, depending on the damage and whether welding is needed.
How we do it
We straighten or cut out the bent section, weld in new rail, re-align the run, and test the gate under power.
Custom Welding
Signs you need it
A bracket, gate frame, or ornamental section has fractured or rusted through and needs fabricated replacement rather than patching.
What it costs in Dallas
Custom welding in Dallas is quoted per job; most small fabrications run $150-$500 in labor plus materials.
How we do it
We make the replacement piece, weld it in, grind it clean, prime it, and photograph the work before and after.
What Gate Parts & Welding Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Hinge replacement (per pair) | $150-$400 |
| Post replacement | $400-$900 |
| Slide-gate rail repair | $200-$500 |
Can you weld a gate without removing it in Dallas?
Most hinge and bracket repairs can be welded in place after we unweight the leaf, so the gate never leaves the property. We bring the welder to the job and prime the work before we leave.
How long does a post replacement take in Dallas clay?
The post itself is usually set in one day; the concrete needs time to cure before the gate is hung and cycled. We schedule the re-hang two to three days later and photograph the set before concrete covers it.
Brands We Service in Dallas
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others in the nine automation brands we carry parts for. Common boards, arms, and photo-eyes are stocked locally in the Dallas-Fort Worth area, so most repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Repair in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Keypad replacement | $180-$340 |
| Card reader replacement | $250-$450 |
| Phone entry unit | $350-$600 |
| Video intercom | $500-$900 |
| Hinge replacement (per pair) | $150-$400 |
| Post replacement | $400-$900 |
| Slide-gate rail repair | $200-$500 |
| Custom welding (labor) | $150-$500 |
Prices here push higher in Dallas when a post has moved far enough that the gate needs re-hanging, or when old wiring has to be re-run through a brick column. The written price we hand you before any work starts is the price, no adjustment afterward unless you approve the change first.
Neighborhoods We Serve in Dallas
We dispatch across Dallas and the surrounding suburbs, with crews already working the Preston Road corridor, Far North Dallas, and the older gated subdivisions where the original operators are now failing together. Typical response for repair calls in Dallas is same-day or next-morning depending on the district.
- Prestonwood
- Bent Tree
- Far North Dallas
- Preston Hollow
- Lake Highlands
Service Area - Cities Near Dallas
From Dallas, our crews also run service to surrounding cities. If you’re in Richardson, TX, Carrollton, TX, Garland, TX, or Rowlett, TX, the same written-price, documented-photo standard applies, and the same live person answers at (469) 613-2832.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
Most Dallas repair calls are handled same-day or next-morning. Access control and parts jobs are scheduled by district, but a person answers the phone 24/7 and can tell you the first available slot.
Many do, especially in the gated subdivisions along Preston Road and in Far North Dallas. We provide a written scope and exact price you can submit for board approval, so the committee knows the work and the cost before voting.
No. The estimate is free, and it includes the specific part numbers, the exact work being done, and the flat price. Clause 1 of The Haven Standard means the number you sign is the number you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.